Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Running type 1 drive from SPX 30

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Running type 1 drive from SPX 30
08-08-18, 05:00 PM (This post was last modified: 08-14-18 03:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
jfitch Offline
Junior Member
**
 		Posts: 25
Joined: Jul 2018
Reputation: 0
[CA11] Running type 1 drive from SPX 30
I have a type 1 hydraulic pump and an SPX 30 course computer. Any reason they won't work together? The documentation requires the SPX 30 for a type 2, I assume because of the current requirements. Perhaps the fuse in the SPX 30 should be downsized for the Type 1 drive?
Find all posts by this user
Quote this message in a reply
08-14-18, 03:50 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Running type 1 drive from SPX 30
Welcome to the Raymarine Forum jfitch,

It is indeed acceptable to use a Type 1 Pump with a SPX30 autopilot course computer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication