Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] System Reset of P70s Controller

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] System Reset of P70s Controller
08-10-18, 03:47 PM (This post was last modified: 08-16-18 11:03 AM by Chuck - Raymarine - Moderator.)
Post: #1
WEG3 Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2017
Reputation: 0
[CA11] System Reset of P70s Controller
I had some difficulties setting up my EV-1, ACU and P70s and think I may have unknowingly bypassed the Set-Up Wizard. I think I need to reset the system, but don’t see how that can be accomplished. Can someone walk me through the reset process? Pressing MENU does not get me to SET-UP.
Find all posts by this user
Quote this message in a reply
08-16-18, 11:12 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] System Reset of P70s Controller
Welcome to the Raymarine Forum WEG3,

The Dockside Wizard menu option is executed via the command sequence MENU->SET-UP->AUTOPILOT CALIBRATION->COMMISSIONING->DOCKSIDE WIZARD. Should this option not be listed then it would be recommended that a Pilot Factory Reset be commanded. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication