[CA] [CA11] Connect Raystar 150 to Axiom 9

[ktcarter]

I am wanting to connect a Raystar 150 to my Axiom 9 MFD. I purchased The Seatalk NG starter kit as the manual said but there is no suitable cable to connect the starter kit to the Axiom MFD. AM I missing something? With my old c80 system the remote GPS receiver plugged directly in the the C80.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum ktcarter,

You were indeed correct in believing that the Axiom MFD and Raystar 150 GPS Sensor were each designed to be interfaced as spurs to a powered and properly terminated SeaTalkng / NMEA 2000 backbone. However, as the NMEA 2000 communications interface of the Axiom/Axiom Pro/Axiom XL MFDs have been terminated with a DeviceNet Micro-C male plug, an A06045 0.4m SeaTalkng to DeviceNet (F) Adapter or A06075 1m SeaTalkng to DeviceNet (F) Adapter will be required to mate the MFD's NMEA 2000 socket to a spur socket (white) within the backbone.

[ktcarter]

Got her ordered and thanks for your assistance.

[Chuck - Raymarine - Moderator]

You're welcome.