Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] Autoroute feature request: control waypoints for depth changes

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autoroute feature request: control waypoints for depth changes
10-18-19, 09:52 AM (This post was last modified: 10-21-19 01:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
russd Offline
Junior Member
**
 		Posts: 1
Joined: May 2019
Reputation: 0
[CA11] Autoroute feature request: control waypoints for depth changes
We've noted that many waypoints seem to be generated where the water depth changes even when no change in vector is made. These waypoints contribute to the limitations on autoroute generation. It would be nice to provide a way to turn off generation of these waypoints or at least to specify some minimum delta in depth.
thanks/r
Russ Daniels
Cat-n-Dogs
Find all posts by this user
Quote this message in a reply
10-21-19, 01:05 PM (This post was last modified: 10-21-19 01:06 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Autoroute feature request: control waypoints for depth changes
Welcome to the Raymarine Forum Russ,

Thanks for the feature suggestion. A corresponding feature request will be logged to consider this feature for inclusion within a future LightHouse 3 software update.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication