Raymarine forum / Raymarine Forums / Instruments v / wind transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
wind transducer
04-21-17, 06:21 AM
Post: #1
george123 Offline
Member
***
 		Posts: 81
Joined: Feb 2016
Reputation: 0
wind transducer
I have at60 wind display with a windvane on the mast. I am not sure how old the transducer is. have attached a picture of the connector at the top of the mast. The questions is can I plug the current shipping transduce into the connector. I do not want to replace the cable or connector in the mast.


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
04-21-17, 11:11 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: wind transducer
Welcome to Raymarine Forum George,

The pictured masthead transducer mount is compatible with the Masthead Wind Transducers currently produced by Raymarine. You may simply plug the replacement transducer directly into the pictured masthead transducer mount.
Find all posts by this user
Quote this message in a reply
04-26-17, 09:22 AM
Post: #3
george123 Offline
Member
***
 		Posts: 81
Joined: Feb 2016
Reputation: 0
RE: wind transducer
Thank you for the information.
Find all posts by this user
Quote this message in a reply
04-26-17, 02:25 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: wind transducer
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication