Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Axiom & RMK-10

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Axiom & RMK-10
04-25-18, 04:42 PM (This post was last modified: 04-26-18 04:00 AM by Derek - Raymarine - Moderator.)
Post: #1
Larrysr Offline
Junior Member
**
 		Posts: 10
Joined: Aug 2017
Reputation: 0
(DG) Axiom & RMK-10
Axiom 12 and RMK-10 connected through a HS5 hub. RMK-10 doesn't turn on. Do I need to connect to external power? Current cabling is a raynet to raynet . Thank you
Find all posts by this user
Quote this message in a reply
04-26-18, 04:01 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: (DG) Axiom & RMK-10
Hi Larrysr

Thank you foryour enquiry.

The RMK10 will need power from somewhere, either use a PoE injector to power the RayNet into the RMK10, or simpler is to connect 12v power cable to the RMK10 direct.

Regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication