Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Further questions about WiFi connectiions to gS MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Further questions about WiFi connectiions to gS MFD
06-03-18, 07:52 PM (This post was last modified: 06-04-18 02:26 PM by Chuck - Raymarine - Moderator.)
Post: #1
rycsailor Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2017
Reputation: 0
[CA11] Further questions about WiFi connectiions to gS MFD
If I read the information correctly, I can connect the Quantum 2 chirp via WiFi to the gS MFD equipped with Lighthouse v3.4.66 for the data link. This means that the radome only requires a power connection and installation becomes that simple? Is this a correct assumption?
Find all posts by this user
Quote this message in a reply
06-04-18, 02:49 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Further questions about WiFi connectiions to gS MFD
Welcome to the Raymarine Forum rycsailor,

Q. This means that the radome only requires a power connection and installation becomes that simple?
A. As long as the signal strength received from the MFD at the Quantum 2 radome's installation location is sufficiently strong, then one only need install the Quantum 2 radome's power cable. Please click here to view a FAQ providing additional detail on the signal strength received from the MFD at the Quantum 2 radome's installation location.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication