Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] C97 What do I need to add depth?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C97 What do I need to add depth?
07-29-19, 04:40 PM (This post was last modified: 08-01-19 01:32 PM by Chuck - Raymarine - Moderator.)
Post: #1
Brad K Offline
Junior Member
**
 		Posts: 3
Joined: Jun 2016
Reputation: 0
[CA11] C97 What do I need to add depth?
I have a C97 MFD with radar and a Raymarine auto pilot. What do I have to add to display depth. My old depthfinder stopped working.
Find all posts by this user
Quote this message in a reply
08-01-19, 01:36 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] C97 What do I need to add depth?
Welcome to the Raymarine Forum Brad,

As the ax7/cx7/e7D/ex7/eSx7 MFDs feature internal 600W 50kHz/200kHz fishfinder sonar circuitry, all one need do is to interface one of the compatible fishfinder transducers found here to the MFD's fishfinder Transducer socket.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication