Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E80 Not Displaying Charts
08-25-19, 12:29 PM (This post was last modified: 08-26-19 11:23 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E80 Not Displaying Charts
Hi, My E80 stopped displaying complete charts and now only displays the basic world chart. I pulled the chip and reinserted as well as restarting the unit but no luck. Any suggestions for how to resolve would be appreciated.

thanks
Find all posts by this user
Quote this message in a reply
08-26-19, 12:15 PM
Post: #2
RE: [CA11] E80 Not Displaying Charts
Welcome back to the Raymarine Forum tholley55,

Please click here to view a FAQ addressing this subject. Should it be determined that the MFD's memory card reader has suffered a failure, then pllease note that Raymarine's Product Repair Center can no longer services these MFDs. While Raymarine's Product Repair Center can no longer service E-Series Classic MFDs, there is a fair chance that SeaWire Marine, Inc. (305.489.1600), a Raymarine dealer/installer, may be able to repair the MFD. It is accordingly recommended that they be contacted regarding the repair of your E80 MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)