TackTick to St2000

[Spindoctor]

I have a TackTick wind/speed/depth system on board and want to install an st2000 autopilot. What will I need to have the st2000 be able to read and use wind data to steer from that info?

Thank you.

[Chuck - Raymarine - Moderator]

SpinDoctor,

Section 4.3 - Cabling and socket installation of the S1000+ / S2000+ Tiller Pilots Owners Handbook provides information concerning the ST2000+ NMEA 0183 input leads. These leads will need to be interfaced to the NMEA 0183 output terminals of the TackTick T122 Wireless Interface. Should the system additionally feature a MFD, then the NMEA 0183 output terminals of the TackTick T122 Wireless Interface would instead be interfaced to the NMEA 0183 input leads of the MFD. The MFD's NMEA 0183 output leads would then be interfaced to the NMEA 0183 input leads fo the ST2000+.