Raymarine forum / Raymarine Forums / General Discussions v / Connections to a sG125

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connections to a sG125
07-31-17, 09:54 AM
Post: #1
rycsailor Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2017
Reputation: 0
Connections to a sG125
When connecting a sG 125, does one connect both the MFD and the SeaTalk starter kit to the 12 Volt power source?
Find all posts by this user
Quote this message in a reply
07-31-17, 09:58 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Connections to a sG125
rycsailor,

As Raymarine MFDs, AIS Transceivers, Autopilot ACUs, VHF radios, SiriusXM Satellite Weather Receivers, radomes, radar pedestals, fishfinder sounder modules, and Ethernet Network Switches are neither designed to be powered via a SeaTalkng/NMEA 2000 backbone nor an Ethernet network, these products should be powered using the power cables which these products have been manufactured with/packaged with or via the product's power terminals.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication