Raymarine forum / Raymarine Forums / Multifunction Displays v / Compass Safe Distances for Raymarine eS-Series MFDs

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Compass Safe Distances for Raymarine eS-Series MFDs
04-20-16, 10:40 AM (This post was last modified: 01-11-17 02:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Compass Safe Distances for Raymarine eS-Series MFDs
Compass Safe Distances for Raymarine eS-Series MFDs

Compass Safe Distances are the minimum distances that product may be installed within proximity to a compass without affecting the deviation sensed by the compass. Should a product be installed closer than the specified Compass Safe Distances, then it is recommended that the compass be re-calibrated following the product's installation. Generally speaking, installation of electronics within 3' of a compass may affect the deviation sensed by the compass, necessitating that the compass be re-calibrated following installation of the marine electronics. The following Compass Safe Distances have been specified within Section 3.11 Selecting a location of the eS-Series MFD Installation Instructions:

[Image: attachment.php?aid=173]

RAYFAQ#


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication