[CA] eS Multifunction unit screen background now grey

[[email protected]]

Last week, we were viewing our 12 inch navigation screen, and all of sudden the screen gradually changed from a white background to a grey background. The change started from the bottom and slowing panned to the top of the screen.

I have tried to reset everything, but still the screen stays grey. If I go to a blue background setting, the background is a blue - grey

What givers - how do I reset it back to white?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum adfinger,

Within which of the MFD's applications are you seeing the color palette which you have referred to? Please attach a snapshot of the MFD's screen to your response.

[[email protected]]

Chuck, I have the color pallet set on white.
If I reset to blue, the background is blue grey.

[[email protected]]

Attached is a PDF of the screen shot.

[Chuck - Raymarine - Moderator]

adfinger,

It is recommended that the vessel be connected to shore power, that its batteries be permitted to achieve a fully charged state, and afterwards and while still connected to shore power that the system be tested. Should the problem persist, then it is recommended that a System Settings Reset (HOME->SET-UP->MAINTENANCE->SYSTEM SETTINGS RESET) be performed to address the reported symptom. Should the problem persist then it would appear that the MFD has suffered a failure and it would then be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.