Raymarine forum / Raymarine Forums / Autopilots v / [CA] Cant get new es98 mfd and autopilot to turn on

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Cant get new es98 mfd and autopilot to turn on
03-21-18, 06:10 PM (This post was last modified: 03-21-18 06:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
PhilH Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2018
Reputation: 0
[CA] Cant get new es98 mfd and autopilot to turn on
Just bought a es98 mfd, type 1 hyd pump and ACU 200 controller and cannot get the mfd to even light up. Tried to follow directions very carefully but what am I doing wrong? Does the es98need the NEMA 0183 wire to have power? I thought if the ACU had power and the data cables were connected to a blue backbone and the backbone connected to a T piece with spur cable going to the es98, it would have power. HELP please
Find all posts by this user
Quote this message in a reply
03-22-18, 10:15 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Cant get new es98 mfd and autopilot to turn on
Welcome to the Raymarine Forum Phil,

Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, Raymarine Multifunction Displays (MFDs) are neither designed to be powered via their communications interface(s) nor to supply power to a SeaTalkng / NMEA 2000 backbone. MFDs are designed to be powered via the power cable included within the MFD's package.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication