Threaded Mode | Linear Mode

whadapair

I presently have a C12 MFD with DSM300 and r199 2kw transducer which I am using for my Plotter and Sounder. I would like to expand and install another MFD to use as my sounder display. My questions are-
What MFD is compatible with my r199 2kw transducer?

What do I need to convert from DSM300 to make the display compatiable.

Thanks

***Chuck - Raymarine - Moderator*** · 10-04-18, 10:04 AM

Welcome to the Raymarine Forum whadapair,

If seeking a MFD with a 12" screen, then it would typically be recommended that an E70368 Axiom 12 MFD or an E70482 Axiom Pro S 12 MFD and a CP370 Sounder Module be considered for use with your currently installed transducer. It may also be possible to interface your C120 MFD to the system via a SeaTalk to SeaTalkng Converter Kit to permit sharing of GPS data, depth, alarms, and system state data between the to systems.

whadapair · 10-08-18, 08:04 AM

Thank you so much for the information.

***Chuck - Raymarine - Moderator*** · 10-08-18, 08:19 AM

You're welcome.