[CA] Transducer selection

[ashleyw]

Hello, recently have had an Axiom Pro 12" installed with RV-100 and TM275LH-W. When I look at the channels I am not sure which are from the RV-100 and which are from the TM275LH-W.

are you able to help identify them?

RealVision 3D (RV-100)
SideVision (RV-100)
DownVision (RV-100)
Sonar

Chirp Low
Chirp High
Chirp High
Chirp AUTO

CW Low
CW High
CW High

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Ashley,

The first group of sonar channel options (groups separated by blue line) which you have listed
- RealVision 3D
- SideVision
- DownVision
- Sonar
- Chirp Low
- Chirp High
are all associated with the RV100 transducer. Please note that the LightHouse v3.2.x software erroneously lists Sonar and CHIRP Low within this group. In a nutshell, the RV transducers support RealVision 3D, SideVision, DownVision, and CHIRP High sonar.

The bottom grouping of sonar channels prefixed with CW are all associated with the TM275LH-W. The CHIRP Auto option within this grouping will automatically select between CW-H and CW-L. As indicated above, the LightHouse v3.2.x software erroneously lists other options. This error will be corrected within a future LightHouse 3 software update.

[ashleyw]

Hello, has this been fixed with any software updates?

[Chuck - Raymarine - Moderator]

Ashley,

No fault has been previously identified. The following Fishfinder sonar channels are associated with the RV-100:
- RealVision 3D
- SideVision
- DownVision
- Sonar

The following Fishfinder sonar channels are associated with the TM275LH-W:
- CW Low
- CW High
- CW Auto