[CA] [CA11] Depthsounders and orcas
|
12-08-18, 05:29 PM
(This post was last modified: 12-10-18 02:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Depthsounders and orcas
Like many Puget Sound sailors, I am concerned about the declining population of resident orca whales. Recently, the Governor's Task Force identified sound interference from ships, ferries and boats as the second most important cause of the decline. Among the sources of noise are recreational depthsounders that emit acoustic waves in the 50kHz range. I have a P7 Shorty transponder on my sailboat, but I do not see any information in the manual (or the website) about the frequency that it transmits. Could Raymarine please provide this information for ALL transponder models? It would be simple to rig up a switch so as to de-power the instrument when the information is not needed - which, frankly, is most of the time.
|
|||
12-10-18, 02:49 PM
Post: #2
|
|||
|
|||
RE: [CA11] Depthsounders and orcas
Welcome to the Raymarine Forum Teranodon,
Please note that the E26009 P7 Shorty Depth Transducer does not transmit a 50kHz. This transducer is designed to be mated to Raymarine depth instruments and transmits at 200kHz. Compared with fishfinding products, instrument depth transducers also ping with much less power than do 200kHz transducers which are interfaced to fishfinders. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)