Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] Follow on Tiller

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Follow on Tiller
02-06-20, 08:38 PM (This post was last modified: 02-07-20 09:39 AM by Louise - Raymarine - Moderator.)
Post: #1
Charliew Offline
Junior Member
**
 		Posts: 1
Joined: Sep 2018
Reputation: 0
[LW11] Follow on Tiller
I just ordered a follow on tiller.
I have two Axiom 9 networked, New EVO Autopilot as well. All working perfectly.
My axiom slave has the EVO Autopilot connected to it.
Can I connect the forward tiller to the Axiom master that’s connected to Axiom slave that’s connected to the EVO Autopilot?
Thank you
Charlie Williams
Find all posts by this user
Quote this message in a reply
02-07-20, 09:45 AM
Post: #2
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] Follow on Tiller
Dear CharlieW,

Than you for your post.

If you are referring to pilot control on the Axiom, you can if you wish set the following.

You can select the slave to have standard pilot control.

You can select the master for power steer, this must be switched on.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication