CP470 and Airmar TM265LH

[mburazor]

Hi

I am planning to purchase CP470 with Airmar TM265LH transducer.

In order to connect CP470 with TM265LH what else should I have? Do I need additional plugs, cables, junction box etc.

Thx

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum mburazor

Please click here to view a FAQ addressing this subject. If seeking a TM265 LH for use with a CP470 or CP570, it is recommended that the A80013 TM265 LH be purchased.

[mburazor]

Thank you for prompt reply.

Am I able to use TM275LHW with CP470?

[Chuck - Raymarine - Moderator]

mburazor,

You're welcome. The A80318 TM275 LH-W may be used with the CP470 as well as the CP570.

[mburazor]

Thank you one more time.

So both transducers are plug and play? Ready to be used with cp470

[Chuck - Raymarine - Moderator]

mburazor,

Q: So both transducers are plug and play? Ready to be used with cp470.
A: Both the Raymarine A80013 TM265 LH and the Raymarine A80318 TM275 LH-W are plug and play compatible with not only the CP470, but also the CP570.

[mburazor]

My final decision is for Raymarine B265LH 1kW Bronze Thru Hull w/Temp - A80010. Please if you can confirm if above is proper model for CP470?

Thx

[Chuck - Raymarine - Moderator]

mburazor,

Raymarine A80010 B265 LH is indeed plug and play compatible with not only the CP470, but also the CP570.

[mburazor]

Hi Chuck

after investigating about correct transducer for my need looks like that B175H meets my demands. Is it possible to run B175H A80050 only with CP470 (cable A80328 required) and later upgrade it with L or M transducer?

[mburazor]

Chuck

is it possible to have connected B265LM and B175H on CP470?