Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 interface to ST60 instruments
01-16-20, 11:14 PM (This post was last modified: 01-17-20 09:56 AM by Chuck - Raymarine - Moderator.)
Post: #11
RE: [CA11] Axiom 9 interface to ST60 instruments
Hi Chuck

Do I need to upgrade the software in the 150G course computer and ST6001+. Are there any updates available for these legacy products?

Thanks

Kirk
Find all posts by this user
Quote this message in a reply
01-17-20, 09:57 AM
Post: #12
RE: [CA11] Axiom 9 interface to ST60 instruments
Kirk,

Q. Do I need to upgrade the software in the 150G course computer and ST6001+. Are there any updates available for these legacy products?
A. Negative. No software updates are available for these products.
Find all posts by this user
Quote this message in a reply
01-19-20, 04:32 PM (This post was last modified: 01-20-20 08:22 AM by Chuck - Raymarine - Moderator.)
Post: #13
RE: [CA11] Axiom 9 interface to ST60 instruments
Hi again Chuck.... and thanks again for all your support. Questions:

1)Can the 150G/ST6001+ be controlled from the Axiom? I have everything connected and it seems to be communicating e.g) autopilot parameters are available on the sidebar. I wasn't able to activate the Pilot control and I don't have a Pilot icon showing so I'm wondering if I will only have control from ST6001+.

2)Will the pilot be able to follow a route automatically?

I haven't done any sea trials yet.

Kirk
Find all posts by this user
Quote this message in a reply
01-21-20, 11:35 AM
Post: #14
RE: [CA11] Axiom 9 interface to ST60 instruments
Kirk,

Q1. Can the 150G/ST6001+ be controlled from the Axiom? I have everything connected and it seems to be communicating e.g) autopilot parameters are available on the sidebar. I wasn't able to activate the Pilot control and I don't have a Pilot icon showing so I'm wondering if I will only have control from ST6001+.
A1. Please click here to view a FAQ addressing this subject.

Q2. Will the pilot be able to follow a route automatically?
A2. This question is also addressed within the FAQ referenced in my response to Q1.
Find all posts by this user
Quote this message in a reply
01-21-20, 11:15 PM (This post was last modified: 01-22-20 08:07 AM by Chuck - Raymarine - Moderator.)
Post: #15
RE: [CA11] Axiom 9 interface to ST60 instruments
thanks very much Chuck!
Find all posts by this user
Quote this message in a reply
01-22-20, 08:08 AM
Post: #16
RE: [CA11] Axiom 9 interface to ST60 instruments
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)