Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] ECI-100 Work with 2006 Crusader Eng?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ECI-100 Work with 2006 Crusader Eng?
01-06-20, 02:20 PM (This post was last modified: 01-06-20 05:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
rshhome Offline
Junior Member
**
 		Posts: 12
Joined: May 2018
Reputation: 0
[CA11] ECI-100 Work with 2006 Crusader Eng?
Looking to interface my silverton crusader engines to show all engine data on one of my displays. I used smartcraft in the past with mercury engines and worked great. Will this ECI-100 work on crusaders going through my NMEA to my axioms? Thanks


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
01-06-20, 05:24 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ECI-100 Work with 2006 Crusader Eng?
Welcome to the Raymarine Forum rshhome,

The ECI-100 has not been designed and tested for use with Crusader engines. I would recommend that Fox Marine be contacted to determine whether one of their engine gateways may be used with your engine(s).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication