Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C127 compatible with RVX1000?
01-23-20, 09:40 PM (This post was last modified: 01-24-20 11:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] C127 compatible with RVX1000?
Would it be possible to load Lighthouse 3 on my C127 MFD & connect it to an RVX1000 module to gain Chirp Side/Down/3D?
Find all posts by this user
Quote this message in a reply
01-24-20, 12:07 PM (This post was last modified: 01-24-20 12:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] C127 compatible with RVX1000?
Welcome to the Raymarine Forum Savoia,

Unfortunately, the a/c/e-Series MFDs do not have sufficient processing power and memory to support running LightHouse 3 software. This would mean that features such as RealVision 3D sonar imaging and other features unique to LightHouse 3 software cannot be performed by an a/c/e-Series MFD. CHIRP sonar, DownVision, or SideVision may be added to the c127 MFD by interfacing it to a CP470 CHIRP Sounder Module, CP100 DownVision Sounder Module, and/or CP200 SideVision Sounder Module respectively, which in turn would be interfaced to a compatible transducer supporting the corresponding type of sonar imaging.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)