Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] MFD & Ray Remote
03-01-20, 10:08 AM (This post was last modified: 03-02-20 04:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
Wink [CA11] MFD & Ray Remote
Question:
=======

On the Ray Remote Screen when you are in the Remote mode..
There is a "Symbol" with a Screen and an double ended Arrow.
What is this function for?
It appears to indicated = "Switch from one Screen to another"

Using a78 MFD with WiFi what does this mean and will it work with my configuration.

MFD = a78
Apple Ipad
Galaxey 9+ Android Mobile Phone

End
Find all posts by this user
Quote this message in a reply
03-02-20, 04:31 PM (This post was last modified: 03-02-20 04:38 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] MFD & Ray Remote
Welcome to the Raymarine Forum Bobby,

The keypad button which you have referred to is the Switcher button. When displaying a page having more than one pane, the Switcher button is used to designate which pane is in focus. A long hold of the Switcher button will cause the pane which is in focus to go to fully occupy the screen ... or if already fully occupying the screen, will cause all of the pages panes to once more come into view.

RayControl is indeed compatible with the iPads. RayRemote should not be used with iPads. As has been indicated within other threads in which I have addressed RayRemote, while it may be operated on an iPhone or Android smartphone, it would typically be used when viewing a MFD's screen which was being repeated on a TV / monitor ... in much that same way that you TV's remote is used to control your TV, where all actions from the remote are expected to be viewed on the TV / monitor.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)