Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Smart Controller and Base Station/Seatalk ng
06-14-16, 12:28 PM
Post: #11
RE: Smart Controller and Base Station/Seatalk ng
(06-10-16 10:30 AM)Chuck - Raymarine - Moderator Wrote:  Finally, the yellow SeaTalk socket of the SeaTalk to SeaTalkng Converter may be interfaced to the yellow SeaTalk socket of the D244 SeaTalk Junction Block...
There is no yellow SeaTalk(1) socket on the D244 - all SeaTalk(1) sockets and plugs are the flat black three lead connectors.

Lulu: 36' Little Harbor WhisperJet
Raymarine: Axiom 12 RV, RV200, Axiom 12 Pro, Evo 1/ACU 150/P70RS, Quantum Q24C, HS5
---previous----
Refugio: 44' trawler
Raymarine: ACU-400, EV-1, P70R, a78, M81105 RFU, ST60 RAI, E22158 ST-STNG
NMEA 2000: Garmin 740S & GMR18 HD, Airmar WS-200WX, Actisense NGT-1
Find all posts by this user
Quote this message in a reply
06-14-16, 02:21 PM
Post: #12
RE: Smart Controller and Base Station/Seatalk ng
Keith,

Thanks for catching the typo. The sentence should have stated "Finally, the yellow SeaTalk socket of the SeaTalk to SeaTalkng Converter may be interfaced to the D244 SeaTalk Junction Block using the SeaTalk to SeaTalkng Cable supplied with the SeaTalk to SeaTalkng Converter Kit."
Find all posts by this user
Quote this message in a reply
06-14-16, 08:05 PM (This post was last modified: 06-15-16 07:45 AM by Chuck - Raymarine - Moderator.)
Post: #13
RE: Smart Controller and Base Station/Seatalk ng
This FAQ contains information that I did not find elsewhere, specifically the part about removing the power to the SeaTalk(1) "bus". Now that SeaTalk(1) documentation is disappearing in the rearview mirror, it would be great if the "SeaTalk to SeaTalkng converter Installation instructions 87255-1-EN" could be updated to include this guidance.

Lulu: 36' Little Harbor WhisperJet
Raymarine: Axiom 12 RV, RV200, Axiom 12 Pro, Evo 1/ACU 150/P70RS, Quantum Q24C, HS5
---previous----
Refugio: 44' trawler
Raymarine: ACU-400, EV-1, P70R, a78, M81105 RFU, ST60 RAI, E22158 ST-STNG
NMEA 2000: Garmin 740S & GMR18 HD, Airmar WS-200WX, Actisense NGT-1
Find all posts by this user
Quote this message in a reply
06-15-16, 08:26 AM
Post: #14
RE: Smart Controller and Base Station/Seatalk ng
Keith,

While the SeaTalk to SeaTalkng Converter's documentation was updated in 2015 to specify support for autopilots and autopilot remote controls (wired and wireless) featuring a SeaTalk communications interface, it lacks information concerning the maximum number of SeaTalk devices which may be powered by each SeaTalk to SeaTalkng Converter and the best practice of powering the SeaTalk bus(ses) from the SeaTalkng backbone via the SeaTalk to SeaTalkng Converter(s). A request has been submitted to Raymarine's documentation team to update this document accordingly with the information included within the referenced FAQ.
Find all posts by this user
Quote this message in a reply
06-15-16, 01:59 PM (This post was last modified: 06-15-16 03:19 PM by Chuck - Raymarine - Moderator.)
Post: #15
RE: Smart Controller and Base Station/Seatalk ng
Thank you Chuck.

Lulu: 36' Little Harbor WhisperJet
Raymarine: Axiom 12 RV, RV200, Axiom 12 Pro, Evo 1/ACU 150/P70RS, Quantum Q24C, HS5
---previous----
Refugio: 44' trawler
Raymarine: ACU-400, EV-1, P70R, a78, M81105 RFU, ST60 RAI, E22158 ST-STNG
NMEA 2000: Garmin 740S & GMR18 HD, Airmar WS-200WX, Actisense NGT-1
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)