Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Upgrade from e7D with existing thru hull transducer
06-01-20, 10:53 AM (This post was last modified: 06-10-20 12:42 AM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] Upgrade from e7D with existing thru hull transducer
I have a 2013 Sea Hunt 225 with a hybrid touch e7d from around same year and wanted to know what new Raymarines would be compatible with the current transducer and what I may lose. Looking to upgrade to a 9" system. Also, plan on adding radar.

Thanks
Find all posts by this user
Quote this message in a reply
06-10-20, 12:42 AM
Post: #2
RE: [TG11] Upgrade with existing thru hull transducer
Hello bkirkland,

The Axiom 7 DV or Axiom 7/9/12 RV would be compatible with your existing transducer, either on their own or alongside one of the new RV-series transducers via a Y-cable which would add the RealVision structure-imaging capability.

The Axiom displays can use any of our current range of radars - the most popular is the Quantum Doppler.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)