Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Arrival alarm
08-18-16, 01:54 PM
Post: #1
Arrival alarm
Is there a way to either disable the arrival alarm or lower the frequency of it? My high frequency hearing is shot, and I don't even hear it. One of the crew usually has to tell me to turn it off.
Find all posts by this user
Quote this message in a reply
08-19-16, 08:41 AM
Post: #2
RE: Arrival alarm
Welcome to the Raymarine Forum rlschmidt,

Unlike the software of the a/c/e/eS/gS-Series MFDs, the software of the MFDs which preceded the a/c/e/eS/gS-Series MFDs did not permit the Arrival Alarm to be disabled. Raymarine MFDs do not feature a configuration setting whereby there owners may configure the frequency and/or volume of alarms sounded by the MFD.
Find all posts by this user
Quote this message in a reply
08-20-16, 08:30 PM (This post was last modified: 08-22-16 11:06 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Arrival alarm
This is a C90W MFD. Does it fall in that catagory? I upgraded the software earlier this year. I can go out to the boat to check the version number.
Find all posts by this user
Quote this message in a reply
08-22-16, 11:08 AM
Post: #4
RE: Arrival alarm
rlschmidt,

The C-Series Widescreen MFDs (C90W, C120W, C140W) are not a/c/e/eS-Series MFDs and as such, the Arrival Alarm within these MFDs cannot be configured OFF.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)