Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can t get new ev100 working
09-02-16, 08:35 AM
Post: #1
Can t get new ev100 working
Hi all. I bought a new ev100 and can t get it working.When I put it in auto, the wheel goes slowly hard over all the way.
I have no other add ons on the system. It's as basic setup as it gets. I have no idea where to start or what I have done wrong.. My compass adjustment was 3 degs.
When I used the 10+ or 10_ the wheels turns 30 degs.
Don t know where to start. I did a reset but have made the same program mistakes as before. Can anyone help?
Thanks
Greg
Catalina 30 Wheel steering
Find all posts by this user
09-02-16, 09:53 AM (This post was last modified: 09-08-16 02:20 PM by Mark - Raymarine - Moderator.)
Post: #2
RE: Can t get new ev100 working
Welcome to the Forum Greg,

Based upon the symptoms, it would appear that the drive motor phasing is incorrect. Please click here to view a FAQ addressing this subject.
Find all posts by this user
09-07-16, 05:48 PM (This post was last modified: 09-08-16 02:19 PM by Mark - Raymarine - Moderator.)
Post: #3
RE: Can t get new ev100 working
Thanks Chuck,
I reversed the wheel motor wires and now runs like it should, Thanks very much for the help,
Greg
Find all posts by this user
09-08-16, 02:21 PM
Post: #4
RE: Can t get new ev100 working
Your'e welcome. Have a great day!
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)