Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk hs connect to slave mfd
01-11-17, 09:01 PM
Post: #1
Seatalk hs connect to slave mfd
I have a fusion 750 that I would like to control from the MFD's but I only have a Seatalk HS plug available on the slave MFD (I don't have a network switch and would like to avoid it). Can I plug the fusion in to the slave and have it work? I know I can plug it into the Seatalkng but I have heard it is better in the HS port.
Find all posts by this user
Quote this message in a reply
01-12-17, 09:59 AM (This post was last modified: 01-12-17 10:00 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Seatalk hs connect to slave mfd
Welcome to the Raymarine Forum anovey,

Should one of the MFD's within the system feature an Ethernet Network socket which presently does not have a cable connected to it, then the socket may indeed be used to interface the system to the Fusion stereo head unit's Ethernet interface. Should you opt to interface it to a MFD's Ethernet Network socket, then that MFD must be powered ON whenever attempting to use the Fusion app within any of the system's other MFDs. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)