Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Route Colot
08-28-17, 06:21 PM
Post: #1
Route Colot
I have an a95 MFD running Lighthouse 19 software with C-Map Charts. I'd like to show the route I am following (the active route) in color. I went through the menus, chose the color (Red), but the active route still displays as black. When I move the display window I sometimes see a flicker of red next to the black line, as if the black line is hiding the red. I also tried a different color (blue) with the same result
How do I color the route so that it stands out?
It would also be nice if the active route were a little wider, or at least bolder, than the other lines on the display
Find all posts by this user
Quote this message in a reply
08-29-17, 03:44 PM
Post: #2
RE: Route Colot
Welcome to the Raymarine Forum mezrich,

While it is possible to assign a color to be used for a route's legs, the leg which is currently being navigated will be rendered as a dashed black line. The course line created as a result of commanding the MFD to Go To a waypoint or cursor position will also be rendered as a dashed black line. A feature request will be logged to consider creation of a new configuration setting to specify the color and line thickness of the active leg line.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)