Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] P319 thru Hull with axiom rv or dv
02-12-18, 06:02 PM (This post was last modified: 02-13-18 09:40 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] P319 thru Hull with axiom rv or dv
Upgrading my system, wondering which adapter I would need to connect my p319 to either an rv or dv axiom unit. Thanks
Find all posts by this user
Quote this message in a reply
02-13-18, 09:46 AM
Post: #2
RE: [CA] P319 thru Hull with axiom rv or dv
Welcome to the Raymarine Forum Farmhand,

It may indeed be possible to use your P319 transducer. However, you will additionally need to determine the transducer's product ID. Please click here to view a FAQ addressing this subject. If compatible and interfaced to an Axiom DV or Axiom RV MFD, the MFD would then support 600W 50kHz / 200 kHz conical sonar imaging.
Find all posts by this user
Quote this message in a reply
03-03-18, 11:32 AM (This post was last modified: 03-05-18 08:40 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] P319 thru Hull with axiom rv or dv
Ok. Thank you, the p319 was being used on a c97 mfd previously. So my question would be , which model number adaptor cable would I need to connect the 319 to an axiom 9rv. Thanks again
Find all posts by this user
Quote this message in a reply
03-05-18, 09:29 AM
Post: #4
RE: [CA] P319 thru Hull with axiom rv or dv
Farmhand,

Should you not additionally be installing a RV transducer and should the currently installed P319's cable be terminated with a plug designed to be directly mated to the c97 MFD's Transducer socket, then this transducer may be adapted with the A80488 adapter for use with an Axiom RV MFD. Should you additionally be installing a RV transducer and should the currently installed P319's cable be terminated with a plug designed to be directly mated to the c97 MFD's Transducer socket, then these transducers may be adapted with the A80491 Y-Cable Adapter for use with an Axiom RV MFD.
Find all posts by this user
Quote this message in a reply
03-05-18, 10:01 AM (This post was last modified: 03-05-18 10:07 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA] P319 thru Hull with axiom rv or dv
Thanks Chuck. My rv transducer will be installed on another mfd in the network. I appreciate your help
Find all posts by this user
Quote this message in a reply
03-05-18, 10:08 AM
Post: #6
RE: [CA] P319 thru Hull with axiom rv or dv
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)