Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] C120 Card Reader
05-07-18, 09:57 AM (This post was last modified: 05-09-18 03:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] C120 Card Reader
I just installed a used C120 to replace my old one that have a broke pin on the DSM connector..
I saved my waypoints on to 2 cards ... when I installed the card to transfer, the newer machine will not read it, nor will it read a chart card.. what do i do .. can the card reader be replaced ??? what is the cost ??
thanks for any response
Find all posts by this user
Quote this message in a reply
05-09-18, 03:29 PM
Post: #2
RE: [CA] C120 Card Reader
Welcome to the Raymarine Forum amarcafina,

At the time of this response, Raymarine's US Product Repair Center still had the parts required to repair C-Series Classic MFD memory card readers. As damage to the MFD's memory card reader can cause damage to other circuitry within the MFD, it is recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked. Upon completion of the bench check you will be contacted with the cost to perform the repair.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)