Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Data Overlays
05-20-18, 07:27 PM (This post was last modified: 05-22-18 01:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Data Overlays
Got the boat this weekend. Boat is awesome and Axiom is pretty incredible. Wish I would've had more time to play around with it.

On the chart app we have SOG as a layer displayed but it is in Knots. is there anyway to display MPH on the lighthouse 3 operating system?
Find all posts by this user
Quote this message in a reply
05-22-18, 01:10 PM (This post was last modified: 05-22-18 01:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Data Overlays
Welcome to the Raymarine Forum wp250outrage,

Detailed instructions for configuring the Units of Measure settings to be used by the MFD may be found withing Chapter 5.10 Settings of the LightHouse 3.4 Advanced Operation Instructions.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-22-18, 05:59 PM (This post was last modified: 05-23-18 08:23 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Data Overlays
Thanks Chuck!

Also, I appreciate all of your info from previous post. You are extremely knowledgeable and have been very helpful.
Find all posts by this user
Quote this message in a reply
05-23-18, 08:26 AM
Post: #4
RE: [CA11] Data Overlays
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)