Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom pro Yanmar engine data
08-16-18, 10:26 AM (This post was last modified: 08-31-18 01:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom pro Yanmar engine data
How do I see Yanmar 4JH57 engine data on my Axiom pro? I have purchased ECI-100 and Device net T connector. What else do I need? What do I plug it into? Any advice or info would be greatly appreciated.
Find all posts by this user
Quote this message in a reply
08-31-18, 01:36 PM
Post: #2
RE: [CA11] Axiom pro Yanmar engine data
Welcome to the Raymarine Forum Mooseboat,

The MFD and NMEA 2000 side of the ECI-100 are each designed to be interfaced as spurs to a powered and properly terminated SeaTalkng / NMEA 2000 backbone. Please click here to view the web page addressing how the engine side of the ECI-100 would be interfaced to the Yanmar engine. Further information on connecting the engine side of the ECI-100 would be interfaced to the Yanmar engine may be found within Chapter 4.6 - Yanmar engine connections of the ECI-100 Installation Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)