Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine Dragonfly 7 broken pins
12-25-18, 02:12 PM (This post was last modified: 12-26-18 10:25 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Raymarine Dragonfly 7 broken pins
I Have a unit with broken pins on the back is there a replacement part for the back of the unit that can be swapped out?

Thanks
Mike
Find all posts by this user
Quote this message in a reply
12-26-18, 10:31 AM (This post was last modified: 12-26-18 10:33 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Raymarine Dragonfly 7 broken pins
Welcome to the Raymarine Forum Mike,

Bent / broken pins within a Dragonfly display's power/transducer socket are typically the result of having rotated the socket's locking ring beyond its stops. Unfortunately like other products featuring a permanently sealed case, the components within a Dragonfly display (to include its power/transducer socket) cannot be repaired. Such damage would not typically be covered by the product's warranty. However, you may want to consider discussing the matter with Raymarine's warranty team (warranty@raymarine.com).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)