Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E120 classic with smart nmea 2000 transducer
06-16-19, 09:46 AM (This post was last modified: 06-18-19 03:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E120 classic with smart nmea 2000 transducer
I have a e120 classic from previous boat that I would like to install on an old mako (1976) that I am restoring. I see there are now “smart” nmea 2000 transducers available and I’m wondering what would the e120 classic do with the data from a nmea 2000 transducer? Will it just provide depth display or will it fully integrate into the normal e120 bottom contour display that I am used to.

Thanks
Find all posts by this user
Quote this message in a reply
06-18-19, 03:14 PM
Post: #2
RE: [CA11] E120 classic with smart nmea 2000 transducer
Welcome to the Raymarine Forum Dennis,

Smart depth/speed/temp transducers cannot be used to support a MFD's fishfinder application features. Smart depth/speed/temp transducers simply provide numerical data to the system. While the MFD would be capable of repeating data from such transducers, offsets, calibration, and alarms associated with data from these transducers would not be supported.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)