Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
dragonfly 7 pro transducer install
05-19-16, 01:29 PM
Post: #1
dragonfly 7 pro transducer install
Hello, I found a post from back in June of 2014 from an Erik Mengel that supposedly had pictures of his transducer install on a Ranger boat (since it has the step at the transom). Is there any way to revive that thread or retrieve the pictures? I have a Ranger and however it was mounted he was able to keep bottom contact on plane and at high speed. It would be very helpful in installing mine.
Thanks!!!!!!
Find all posts by this user
Quote this message in a reply
05-19-16, 01:45 PM
Post: #2
RE: dragonfly 7 pro transducer install
Welcom to the Raymarine Forum Ranger520Vx ,

While Raymarine's forum has move, the retired Raymarine Technical Forum has been left in place for the time being as a reference source. The old Raymarine Technical Forum's discussion which you have referenced may be accessed by clicking here.
Find all posts by this user
Quote this message in a reply
05-20-16, 10:00 AM
Post: #3
RE: dragonfly 7 pro transducer install
Thanks Chuck!! For some reason, I can view the picture of the proposed locations at the beginning of the thread, but I do not see any of the "final install"......could be my system is blocking, but I will go with location "3". Thanks for your assistance!!!!
Find all posts by this user
Quote this message in a reply
05-20-16, 10:17 AM
Post: #4
RE: dragonfly 7 pro transducer install
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)