Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] How to use ACU-150 with My new Lowrance HDS-12-live
08-05-19, 12:17 PM (This post was last modified: 08-07-19 09:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] How to use ACU-150 with My new Lowrance HDS-12-live
What does it take to hook my new ACU-150 installed in spring to my just purchased Lowrance HDS-12-Live. Hardware? Software?
Find all posts by this user
Quote this message in a reply
08-07-19, 10:02 AM
Post: #2
RE: [CA11] How to use ACU-150 with My new Lowrance HDS-12-live
Welcome to the Raymarine Forum Dengle,

Q. What does it take to hook my new ACU-150 installed in spring to my just purchased Lowrance HDS-12-Live. Hardware? Software?
A. From a networking standpoint, Evolution autopilots and the Lowrance HDS-12-Live both support NMEA 2000 communications. The currently installed powered and properly terminated SeaTalkng / NMEA 2000 backbone which is interfacing the Evolution autopilot components to one another will need to be extended to the location of the Lowrance HDS-12-Live, where an additional spur socket will be added. The Lowrance HDS-12-Live may be interfaced to this spur socket via either of the following adapter cables:
- A06045 15.7in (0.4m) SeaTalkng Spur to DeviceNet (F) Adapter Cable
- A06075 39.4in (1.0m) SeaTalkng Spur to DeviceNet (F) Adapter Cable
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)