Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] ITC-5 speed error
08-12-19, 03:45 AM (This post was last modified: 08-14-19 05:59 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] ITC-5 speed error
Dear reader,

Hope you can help me out here...

I have a depth/speed transducer connected on a ITC-5.
Unfortunatly the hull speed is not given on the i70s anymore.

The led indicator gives a slow continuous puls. (speed pulse time-out?)
if i disconnect the shield cable the led is on. But the i70s gives me a speed reading without even moving...

Any thoughts?

Because I have a depth/speed transducer , I only have 1 shield cable. Does this have to be connected to the speed/temperature or depth converter connection?
temperature and depth works as it should though...
Find all posts by this user
Quote this message in a reply
08-22-19, 04:25 AM
Post: #2
RE: [LW11] ITC-5 speed error
Dear Ecstasea,

Thank you for your post.

Connect the shield to the depth terminal. This should resolve any odd speed readings.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)