Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C140 W power to Axiom XL Power
10-15-19, 05:34 PM (This post was last modified: 10-17-19 12:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] C140 W power to Axiom XL Power
Hi me again!

In replacing the XL with the C140, can i re-use the existing power/nmea cable or convert or do I need to replace it?
Find all posts by this user
Quote this message in a reply
10-17-19, 12:35 PM
Post: #2
RE: [CA11] C140 W power to Axiom XL Power
Welcome back to the Raymarine Forum Nick,

Power/SeaTalk/NMEA 0183/Video Input Cables which were designed for use with the C-Series Widescreen MFDs are not compatible with Axiom Pro/Axiom XL MFDs, a9x/a12x MFDs, c/e-Series MFDs, eS9x/eS12x/eS14x MFDs, or gS-Series MFDs. As such, the currently installed C-Series Widescreen Power/SeaTalk/NMEA 0183/Video Input Cable will need to be replaced.
Find all posts by this user
Quote this message in a reply
10-17-19, 01:26 PM (This post was last modified: 10-17-19 02:17 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] C140 W power to Axiom XL Power
Thanks Chuck - i actually only need power since i dont use video and i have nothing running on the nmea 183 any longer - all ST networked thank you!
Find all posts by this user
Quote this message in a reply
10-17-19, 02:17 PM
Post: #4
RE: [CA11] C140 W power to Axiom XL Power
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)