Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E7 and waypoint input
10-15-19, 11:22 PM (This post was last modified: 10-18-19 08:44 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E7 and waypoint input
Hi there. I have previously asked if e7 MFD’s can accept TLL input for waypoints (no they can’t unfortunately) but am now trying to determine if they can accept WPL sentences over the NMEA 0183 network. Can anyone help me here please? Many thanks in advance.
Find all posts by this user
Quote this message in a reply
10-18-19, 08:48 AM
Post: #2
RE: [CA11] E7 and waypoint input
Welcome back to the Raymarine Forum Mim,

Waypoints and/or routes cannot be transferred into the waypoint/route memory of a MFD running LightHouse II or LightHouse 3 software via the MFD's NMEA 0183, NMEA 2000, or Ethernet network communications interface. Waypoints and/or routes may be transferred into the waypoint/route memory of a MFD running LightHouse II or LightHouse 3 software via a GPX file which has been saved to a compatible microSD memory card.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)