Raymarine forum / Raymarine Forums / Autopilots v / EV-150 - Install

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-150 - Install
04-21-17, 11:03 AM (This post was last modified: 04-21-17 11:05 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: EV-150 - Install
Welcome to the Raymarine Forum Brett,

We're sorry to learn that you were unable to locate the Evolution EV-1 and ACU Installation Instructions. The latest version of the Evolution EV-1 and ACU Installation Instructions has been posted with the Evolution Autopilot documents (Support->Manuals and Documents), includes content covering the EV-150 (ACU-150), and may be found here. This document identifies how the SeaTalkng backbone will be powered (see Section 3.6, and the note on page 32) and lists the items packaged with the EV-1 Sensor Core and ACU-150. The package of the Evolution EV-150 additionally includes a R70160 Evolution Cable Kit which includes a SeaTalkng Power Cable (red w/black stripe and white SeaTalkng spur plug) to supply power to the SeaTalkng backbone.

Please click here to view a FAQ addressing installing power circuits for marine electronics.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV-150 - Install - [email protected] - 04-20-17, 10:53 PM
RE: EV-150 - Install - Chuck - Raymarine - Moderator - 04-21-17 11:03 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication