Identifying this Speed Transducer Insert, Help! Lots of pics.
|
05-02-17, 02:21 PM
(This post was last modified: 05-04-17 08:13 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: Identifying this Speed Transducer Insert, Help! Lots of pics.
Welcome to the Raymarine Forum Charlie,
The subject transducer is a very old ST80 Speed transducer which had been designed to be interfaced to a dongle which was in turn interfaced to the SeaTalk bus. Unfortunately, Raymarine no longer has replacement inserts or parts for this transducer. If seeking to replace the transducer then it would be recommended that it be replaced with an E26031 ST800-P120 Analog Speed Temp Transducer. The leads of this transducer will be mated directly to the Speed / Temp transducer terminals on the back side of the ST60 Tridata display. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Identifying this Speed Transducer Insert, Help! Lots of pics. - enzeno - 04-28-17, 03:45 PM
RE: Identifying this Speed Transducer Insert, Help! Lots of pics. - Chuck - Raymarine - Moderator - 05-02-17 02:21 PM
RE: Identifying this Speed Transducer Insert, Help! Lots of pics. - enzeno - 05-03-17, 08:06 PM
RE: Identifying this Speed Transducer Insert, Help! Lots of pics. - Chuck - Raymarine - Moderator - 05-04-17, 08:14 AM
RE: Identifying this Speed Transducer Insert, Help! Lots of pics. - enzeno - 05-05-17, 04:09 PM
RE: Identifying this Speed Transducer Insert, Help! Lots of pics. - Chuck - Raymarine - Moderator - 05-08-17, 10:52 AM
|
User(s) browsing this thread: 1 Guest(s)