European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
NMEA Connections to ST2000+
|
|
05-03-17, 08:50 AM
(This post was last modified: 05-03-17 08:51 AM by Chuck - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
|
RE: NMEA Connections to ST2000+
Willy,
The autopilot must be in Auto mode prior to engaging track mode. The screen of the ST2000+ should respond as indicated below when not receiving navigational data required support tracking to a waypoint: It is recommended that you ensure that the chartplotter (must support NMEA 0183 v2.1 or higher communications protocol) has been 1) interfaced to the autopilot as has been specified within my initial response and 2) has been configured to transmit all supported NMEA 0183 sentences at 4800 BAUD. Should the problem persist, then please respond with the 4800 BAUD NMEA 0183 capture as specified within my prior response. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
NMEA Connections to ST2000+ - RiverRunner - 05-01-17, 08:24 PM
RE: NMEA Connections to ST2000+ - Chuck - Raymarine - Moderator - 05-02-17, 03:42 PM
RE: NMEA Connections to ST2000+ - RiverRunner - 05-03-17, 08:07 AM
RE: NMEA Connections to ST2000+ - Chuck - Raymarine - Moderator - 05-03-17 08:50 AM
RE: NMEA Connections to ST2000+ - RiverRunner - 05-03-17, 07:41 PM
RE: NMEA Connections to ST2000+ - Chuck - Raymarine - Moderator - 05-04-17, 08:29 AM
|
User(s) browsing this thread: 1 Guest(s)