No Pilot error message on P70

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum daknecht,

The reported issue is quiet likely due to incompatible versions of software within the Evolution autopilot components. It is recommended that
1) a microSD memory card be populated with the a/c/e/eS/gS-Series MFD v19.03 software update files (includes software update files for most SeaTalkng devices).
2) all but one of the Evolution autopilot components (i.e. p70S, EV-1, ACU-150) be temporarily disconnected from the SeaTalkng backbone.
3) switch the MFD ON
4) after the Limitations of Use dialog has been acknowledged, then insert the microSD memory card containing the software update files into the MFD's memory card reader
5) command the MFD to check the card for updates
6) if the MFD's software update screen indicates that a software update is available for the autopilot component which is connected to the SeaTalkng backbone, then command the MFD to update the autopilot component's software.
7) when the software update has been completed, temporarily disconnect the autopilot component from the backbone and then connect one of the other autopilot components to the backbone.
8) repeat 5 through seven until each of the autopilot's components have either been updated or have been verified to have the latest software installed.
9) reconnect the remaining autopilot components to the backbone