Raymarine forum / Raymarine Forums / Product Selection Assistance v / Upgrade from c80

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrade from c80
05-05-17, 10:28 AM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Upgrade from c80
Marc,

Q1) The DSM 300 works fine but am open to suggestions. I am only trolling the edge here and occasionally marlin fishing so would welcome your thoughts onwhat would work with my transducer.

A1) How deep do you fish? How deep is the shelf which you have identified.


Q2) Not sure what model GPS sensor I have, if you let me know how to find out I can look.
A2) Should the GPS sensor be disconnected from it's base, then you will find a decal on the underside of the transducer specifying its product ID / serial number.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrade from c80 - mfullertonbda - 05-03-17, 08:53 AM
RE: Upgrade from c80 - mfullertonbda - 05-03-17, 02:36 PM
RE: Upgrade from c80 - mfullertonbda - 05-03-17, 02:38 PM
RE: Upgrade from c80 - mfullertonbda - 05-05-17, 09:26 AM
RE: Upgrade from c80 - mfullertonbda - 05-05-17, 09:22 AM
RE: Upgrade from c80 - Chuck - Raymarine - Moderator - 05-05-17 10:28 AM
RE: Upgrade from c80 - mfullertonbda - 05-05-17, 03:16 PM
RE: Upgrade from c80 - mfullertonbda - 05-08-17, 04:46 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication