Wheel not turning

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Coastal Marine,

Based upon the symptoms reported, it is suspected that Motor A and Motor B leads are not forming a closed circuit with the corresponding Motor A and Motor B terminals of the autopilot course computer. It is correspondingly recommended that continuity checks of these leads be performed. Should no fault be found, then it would be recommended that the autopilot's motor be tested in both directions per the FAQ found here. Should no fault be found with the motor, then it would appear that the ACU has suffered a failure necessitating that it be replaced or sent to Raymarine’s Product Repair Center to be bench checked / serviced.