Networked Chart Data

[Chuck - Raymarine - Moderator]

Jason,

It is recommended that you verify that each MFD can access access imagery from the system radar transducer. If so, then it would be recommended that any waypoints, routes, and tracks be back up to a microSD memory card and that the configuration settings of the MFDs be noted. After doing so, it would then be recommended that a System Settings & Data Reset be commanded from each MFD. After doing so, the system should then be tested again. Be certain to use the Chart Selection configuration setting within each Chart application page/pane being view to select the type of cartography which you desire to view and for you have a corresponding chart card in the MFD's memory card reader. Please click here to view a FAQ addressing this subject. Should the problem persist, then please indicate whether the Ethernet network includes any third party Ethernet cables and whether any of the Raymarine Ethernet cables have been modified, spliced, or have been subjected to bends having a radius of less than 3".