Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] ST60 wind, tested voltage

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60 wind, tested voltage
05-30-17, 08:34 PM (This post was last modified: 12-06-19 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #3
mauruuru Offline
Junior Member
**
 		Posts: 13
Joined: Oct 2016
Reputation: 0
RE: [CA11] ST60 wind, tested voltage
Using this information to test my ST60+ wind instrument and xducer I had strange readings so went a bit further. From this info can you tell if it is only the display unit or both display an xducer requiring replacement:
Display and cducer connected
R-Shield. 7.96 V DC
G-Shield. 5.6 V DC
B-Shield -0.03 V DC
Y-Shield. 3.6 V. AC

Windvane Cable only
R-S. 21.6 k ohms
G-S. 38.6 k ohms
B-S. 6.1 ohms
Y-S. 65.4 k ohms

Display Only powered on
R-S. 7.96 V DC
G-S. 0.001 V DC
B-S. 0.001 V DC
Y-S. 8.0 V DC
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60 wind, tested voltage - mauruuru - 05-30-17 08:34 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication