Digital Radome pin-out

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum abarbasch,

Should the metal locking ring of a Digital Radar Cable be missing, then the Digital Radar Cable or Digital Radar Extension Cable must be replaced. As the plug of Digital Radar Cable and Digital Radar Extension Cables feature an alignment keyway, it is not possible to incorrectly seat a Digital Radar Cable's plug within the socket of a Digital/HD Digital Radome or HD/Super HD Open Array Pedestal ... i.e. the plug cannot be fully seated unless the plug's keyway is aligned with the socket's alignment key. With respect to the plug's power pins, they are the plug/socket's two largest pins. The upper pin is the positive power pin and then lower pin is the negative power pin. The aforementioned keyway and key are located above the positive power pin.