Raymarine forum / Raymarine Forums / Instruments v / Can a DF 7 Pro transducer CPT-DVS be used as a thru hull

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can a DF 7 Pro transducer CPT-DVS be used as a thru hull
06-30-17, 01:49 PM (This post was last modified: 06-30-17 01:51 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Can a DF 7 Pro transducer CPT-DVS be used as a thru hull
Welcome to the Raymarine Forum Timothy,

Unfortunately, a transom mounted transducer would not be recommended for this application. Any transducer installed onboard would have to be located forward of the jet drive's intake grate and any other thru-hulls to prevent an aerated flow of water from flowing across the face of the transducer. Please click here to view a FAQ addressing this subject. I would tend to favor a product which supported use of a CPT-S thru-hull transducer for this application (ex. Axiom DV MFD, eSx8 MFD, or ax8 MFD).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Can a DF 7 Pro transducer CPT-DVS be used as a thru hull - Chuck - Raymarine - Moderator - 06-30-17 01:49 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication